铝型材光伏支架主要使用于分布式屋顶光伏电站。
品名：铝导轨
规格：多种规格(可以根据客户要求定制尺寸)
长度：多种规格(可以根据客户要求定制尺寸)
材质：铝合金6063-T5
表面处理：阳极氧化
优点为：
（a）安装铝型材支架不生锈、外表美观且轻便易安装。
（b）抗自然腐蚀：放置在空气的铝能够在表层形成致密的氧化铝保护层，这一保护层能防止铝材的进一步氧化。
（c）抗电偶腐蚀：钢铁支架与铝制光伏板框架接触时，铝制光伏板框容易发生电偶腐蚀，而铝材支架则避免了这一现象。
（d）平衡电压：铝材拥有优良的导电性，因此能够更好地传导光伏支架系统中因各种原因所产生的弱电流。
（e）耐低温：普通钢铁尤其是焊接区域在低温环境中脆弱易碎，而铝材的强度则反而增加。
Aluminum alloy bracket
The aluminum profile photovoltaic scaffold is mainly used in the distributed rooftop photovoltaic power station.
Name: aluminum guide
Specifications: a variety of specifications (can be customized according to customer requirements)
Length: a variety of specifications (can be customized according to customer requirements)
Material: aluminum alloy 6063-T5
Surface treatment: Anodizing
The advantages are:
(a) the installation of aluminum profile support is not rusty, beautiful appearance and easy to install.
(b) resistance to natural corrosion: the aluminum in the air can form a dense layer of alumina protection layer on the surface, which prevents further oxidation of the aluminum.
(c) anti galvanic corrosion: when the steel bracket contacts with the frame of the aluminum photovoltaic panel, the aluminum PV frame is easy to produce galvanic corrosion, while the aluminum stent avoids this phenomenon.
(d) balance voltage: aluminum has excellent conductivity, so it can better conduct the weak current caused by various reasons in the photovoltaic support system.
(E) low temperature resistance: the ordinary steel, especially the welding area, is fragile and fragile in the low temperature environment, while the strength of the aluminum material increases.
C型钢支架
C型钢光伏支架主要使用于分布式平面屋顶光伏电站及地面电站上。
品名：热镀锌C型钢
规格：多种规格(可以根据客户要求定制尺寸)
长度：多种规格(可以根据客户要求定制尺寸)
材质：Q235
表面处理：热镀锌
优点：
（a）安装系统、灵活多变的组合，具有极佳的通用性。且系统满足多种方式的安装，可方便地进行后补安装。
（b）一个系统、一次施工、一步到位的装配式施工整齐、美观、大方。
（c）具有超凡的承载力，受力稳定，使用寿命长。
（d）C型钢卷边带有锯齿，可有效抗剪、止滑、抗冲击；且条形安装孔外观美观，灵活方便。
（e）连接件通用性强，适合各种应用，简便快捷，二、三和四维高强应用；预组合实现快速安装，提供可靠的锁键连接，强度高。
C steel support
The C type steel photovoltaic scaffold is mainly used in the distributed flat roof photovoltaic power station and the ground power station.
Name: hot-dip galvanized C steel
Specifications: a variety of specifications (can be customized according to customer requirements)
Length: a variety of specifications (can be customized according to customer requirements)
Material: Q235
Surface treatment: hot-dip galvanizing
Advantage：
(a) installation system, flexible and changeable combination, with excellent versatility. And the system meets a variety of ways of installation, and can be easily repaired after the installation.
(b) a system, a construction, one step of the assembly construction is neat, beautiful and generous.
(c) has the supernatural bearing capacity, the force is stable, the service life is long.
(d) C steel coil with sawtooth, can effectively resist shearing, skid, impact resistance; and the bar - shaped installation hole is beautiful, flexible and convenient.
(E) connections is universal, suitable for a variety of applications, simple and fast, and two or three high strength four application; pre assembly to achieve rapid installation, reliable locking connection, high strength.
